Installation And Structural Principle Of One-way Needle Roller Bearings 5

- Jul 30, 2018 -

Installation and structural principle of one-way needle roller bearings 5

A one-way bearing, as the name suggests, is a type of bearing that can operate freely in a single direction and can not be jammed in the other direction. Because the industry uses different functions, it has different functions, so its name is also a lot. It can be called a backstop, or it can be called an overrunning clutch. In short, everyone knows that they are another name for a one-way bearing. It is. As shown, the one-way bearing has a metal housing with a number of rollers, needles or balls in the housing.

1. Wind power: Wind turbine bearings usually contain yaw bearings, transmission system bearings (spindle and gearbox bearings). Changzhou Shine needle roller bearings provide customers with yaw bearings and pitch bearings. The yaw bearing is installed at the joint of the tower and the cockpit, and the pitch bearing is installed at the joint of the root of each blade and the hub.


2. Robot: Equipment such as industrial robots. Changzhou Shine Needle Roller Bearings are mounted on the joints of the robot. This structure enables incredibly high-tight rotation.


3. Medical equipment: The high-precision, low-noise, high-life, high-reliability series of medical equipment spindle needle roller bearings developed by Shine Bearing have been widely used in large medical instruments such as gamma knives, CT machines, and nuclear magnetic resonance machines.


4. Solar: Rotating solar panels are a good way to increase energy.


The structure of the one-way bearing is generally two types of roller type and wedge type. First let's take a look at how the roller structure works.


Related Products